Payment & Shipping Terms:
Nankai Biotech Aflatoxin M1 Milk Rapid Test Kit is a rapid, one step test for the qualitative (or quantitative) detection of Aflatoxin M1 Residue in raw milk.
－Open the incubator, and make it to the temperature of 50℃.
－Suck 0.1ml milk sample into a colloidal gold micro-well and then incubate for 5 mins.
－Dissolve the red substance fully by using small dropper.
－Put the test strip into the colloidal gold micro-well, and incubate 5 mins.
－Take out the test strip and read the result.
Notes: The result should be read within 3 minutes. Do not interpret results after 3 minutes.
READING RESULTS BY EYES
The Test Line (T) is the same as or darker than the Control Line (C). It is negative.
The Test Line (T) is lighter than the Control Line (C), or there is no Test Line. It is positive.
INVALID: Reference Line fails to appear.
Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for an invalid result. Review the procedure and repeat the test with a new test Kit. Stop using the test kit immediately if the problem is not solved and contact your local distributor.
NKBIO RAPID TEST Advantages:
1. 3-5 min reading results
2. Detection limits respond to EU and US FDA norms
3. Single test for every target sample
4. Neither professionals nor equipment required
5. Eyes interpretation or quantitative measurement,
suitable for lab and field use
6. Room temperature storage
7. Non-toxic and harmless
Contact Person: Miss. Bella