Cdv Test Kit Canien Distemper Lateral Flow Antigen Test Kit canine distemper pcr test

Canine Distemper Antigen Rapid Test Kit

(eye secretion, nasal fluid or saliva)

●INTENDED USE

Canine Distemper Antigen Rapid Test Kit (eye secretion, nasal fluid or saliva) is a solid phase immunochromatographic assay for the rapid, qualitative and dfferentia ldetection of antibody to animal eye secretion, nasal fluid or saliva. This test provide only a preliminary analytical result. A secondary analytical method must be used to obtain a confirmed result. Gas chromatography and mass spectrometry (GC/MS) are the preferred confirmatory methods.

●PRINCIPLE

Canine Distemper Antigen Rapid Test Kit is based on the technology of colloidal gold immunochromatography assay. After the sample is added to the sample well, the liquid sample and colloidal gold marker are moving together along with chromatographic membrane. If Canine Distemper exists in the sample, the antibody is combined with it and the test line appears red. There is no color reaction when the testing sample has no Canine Distemper Virus.

●MATERIAL SUPPLIED

●STORAGE AND STABILITY

1. The kit can be stored at room temperature of 2-30℃.

2. The shelf life is 24 months. The test device is stable through the expiration date printed on the sealed pouch. The test device must remaing in the sealed pouch until use.

3. DO NOT FREEZE. Do not use beyond the expiration date.

●SAMPLE REQUIREMENTS

This test kit is only applicable to the detection of dog wastes.

●SPECIMEN COLLECTION

Canine Parvovirus Antigen Rapid Test Kit can be performed using eyes secretions, nasal fluid or saliva.

1. Use swabs to collect either eyes secretions, nasal fluid or saliva .

2. Unscrew the cap of bottle, insert the cotton swab into the bottle containing the buffer .

3. Apply the cotton swab against the tube wall and circle along the it at least 10 times to make buffer and sample fully mixed.

4. Squeeze the cotton swab against the tube wall to push the liquid out.

5. Discard the swab, cap and keep the tube still.

6. Suck 100ul (3 drops) of liquid supernatant to test.

●TEST PROCEDURE

Allow test cassete, specimen, and/ or controls to equilibrate to room temperature (15-30℃) prior to testing.

1. Remove the test cassette from the sealed foil pouch and use it as soon as possible. Best results will be obtained if the assay is performed          within one hour.

2. Place the test device on a clean and level surface.

3. Add 100ul (3 drops) sample into the sample well.

4. Wait for the colored line(s) to appear. The result should be read at between 10-15 mintues. It is invalid after 15 minutes.

●READ RESULTS WITH NAKED EYES

NEGATIVE: If only the C band is present, it is negetive.

POSITIVE: In addition to the presence of C band, T band is developed, it is positive.

INVALID: Reference Line Fails to appear

Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for an invalid result.

Review the procedure and repeat the test with a new test kit. Stop using the test kit immediately if the problem

is not solved and contact your local distributor.