Canine Distemper Virus Antigen Rapid Test Canine Distemper Virus Antigen Lateral Flow Assay kit

Canine Distemper Virus(CDV) Antigen RapidTest Kit

(eye secretion, nasal fluid or saliva)

INTENDED USE

Canine Distemper Virus Antigen Rapid Test Kit ((eye secretion, nasal fluid or saliva)is a solid phase immunochromatographic assay for the rapid,qualitative and dfferentia ldetection of antigen to Canine Distemper Virus in animal whole blood serum, or plasma. This test provide only a preliminary analytical result. A secondary analytical method must be used to obtain a confirmed result. Gas chromatography and mass spectrometry (GC/MS) are the preferred confirmatory methods.

PRINCIPLE

The Canine Distemper Virus(CDV)Antigen Rapid Test Kit is based on the technology of colloidal gold immunochromatography assay.

After the sample is added to the sample well,the liquid sample and colloidal gold markerare moving together along with chromatographic membrance. if Canine Distemper Virus exists in the sample, the antibody is combined with it and the test Line appears red. There is no color reaction when the testing sample has no Canine Distemper Virus.

MATERIAL SUPPLIED

STORAGEANDSTABILITY

The kit can be stored at room temperature of 2-30℃. The shelf life is 24 months. The test device is stable through the expiration date printed on the sealed pouch. The test device must remaing in the sealed pouch until use. DO NOT FREEZE.Do not use beyond the expiration date.

TESTPROCEDURE

Allow test cassete, specimen, and/ or controls to equilibrate to room temperature (15-30*C) prior to testing.

1.Remove the test cassette from the sealed foil pouch and use it as soon as possible.Best results will be obtained if the assay is performed within one hour.

2. Place the test device on a clean and level surface.

3.Add100ul (3 drops)sample into the sample well

3.Wait for the colored line(s)to appear.The result should be read at between 10-15 mintues.it is invalid after 15 minutes.

INTERPRETATIN OF RESULTS

NEGAIVE: if only the C band is present, the result is negative.

POSITIVE: in addition to the presence of C band, T band is developed, it is positive

INVALID :Control line fails to appear.

Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure.Review the procedure and repeat the test with a new test kit.If the problem persists,discontinue using the test kit imediately and contact your local distributor.